Set the main site IPX server internal network number to ‘A’. At the main site set both the router LAN port IPX network number and the IPX server external network number to ‘AA’. Set the remote site IPX server internal network number to ‘B’. At the remote site set both the router LAN port IPX network number and the IPX server external network number to ‘BB’. Set the Router WAN port IPX network number on both Juniper Routers to ‘CC’. Check that the frame type used on both LAN’s match those chosen for ‘AA’ and ‘BB’. For consistency set both WAN ports encapsulation type to be the same, i.e. ‘Ethernet 802. Reboot the Juniper Routers and bring up the servers on the network. Log onto the main router and check the log file for circuit status, i.e. ‘cct.ether1 enabled’. Check the IPX routing table by issuing the ‘rgetir’ command from the Network Control Language Interpreter (NCL) command prompt. Check the routing table entries for correct network number, router interface number and that all services are listed.
